Submersible pump Initial Drain 10-7

Product no.: 4168021

Out of stock
Available soon

157.30 €

Incl. VAT

Available delivery methods: Shipments to the Baleares, Pick up from our store, Europe 1, Maritime Canarias, Europe 2, MRW, Expediciones > 40 Kg

Description

Submersible pump as a monobloc unit with submersible motor, handle, 10 m electrical connection cable and integrated thermal overload protection. High operational reliability due to its motor protection with a lip seal. The pump with a connected float switch is suitable for pumping slightly contaminated water, rainwater, drainage water and washing water.

Product data
Impeller type	General impeller
Free ball passage of the hydraulics	5 mm
Maximum operating pressure PN	3 bar
Max. immersion depth	5 m
Fluid temperature T	5 °C

Motor data
Mains connection	1~230 V, 50 Hz
Voltage tolerance	±10 %
Rated power P2	0.37 kW
Power consumption P1 max	0.55 kW
Rated current IN	3 A
Starting current I	0 A
Activation type	Direct online (DOL)
Rated speed n	2800 1/min
Max. switching frequency t	60 1/h
Insulation class	F
Protection class	IP68
Operating mode (immersed)	S1
Operating mode (non-immersed)	–

Cable
Connection cable length	10 m
Cable type	H05RN-F
Cable cross-section	3G1 mm²
Mains plug	Schuko
Type of connection cable	Non-detachable

Equipment/function
Float switch	no
Explosion protection type	-
Motor protection	PTO

Materials
Pump housing	PP
Impeller	PA-GF30
Shaft	Stainless steel
Sealing on pump side	BQ1PFF
Sealing on motor side	BQ1PFF
Gasket material	NBR
Motor housing	Stainless steel

Installation dimensions
Pipe connection on the suction side DNs	-
Pipe connection on the discharge side DNd	Rp 1½

Ordering information
Brand	Wilo
Product description	Initial DRAIN 10-7
Net weight, approx. m	5.1 kg
Article number	4168021

Browse these categories as well: Wilo Pumps, Residuales

Wilo Submersible pump Initial Drain 10-7 4168021

IPEMA Soluction & Services

Home page Pumps PSH & WILO Wilo Pumps Submersible pump Initial Drain 10-7

Submersible pump Initial Drain 10-7